Table of Contents
Advertisement
8. Apply an oil film finely to the seal of a new filter.
9. Attach a new filter. Turn the filter until the seal touches
the filter head, and then tighten it further a half turn by
hand.
NOTE: Do not use a filter wrench for tightening the filter.
Overtightening can damage the filter and its seal.
10. Add new engine oil to the engine. Attach the filling
plug.
11. Run the engine for several minutes to check that there
is no leak.
Recheck the level, and add oil if necessary.
NOTE: always wait 15 min to allow the oil to return to the
sump before checking the oil level.
6 - MAINTENANCE
6-42
4
SMIL14CEX2751AA
5
SMIL17CEX0159AA
Advertisement
Table of Contents
