Table of Contents
Advertisement
If both the rear and right-side cameras are equipped, the
view of each camera or the simultaneous view of both
cameras can be shown on the display.
To select the desired camera view, press the button (4).
The selection toggles between the rear camera view, the
side camera view, and the simultaneous view of both cam-
eras.
The simultaneous view of both cameras is set as follows.
The view of the rear camera (R) is shown on the left side
of the display. The view of the right side camera (S) is
shown on the right side of the display.
The sequence of the camera views is set by default as
indicated in the picture. The rear camera view comes up
first, then the side camera view, and finally the simultane-
ous view of both cameras.
NOTE: Consult the CASE CONSTRUCTION Dealer in or-
der to modify the setting of the camera views.
3 - CONTROLS AND INSTRUMENTS
3-56
3
SMIL18CEX1577BB
4
SMIL18CEX1578AA
Advertisement
Table of Contents
