Table of Contents
Advertisement
Left mirror (A)
Install the mirror as shown.
The dimension (L) is 155 mm (6.1 in).
The tightening torque of the bolt (1) is 71.6 – 91.2 N·m
(52.8 – 67.3 lb ft).
Position the mirror so that the rear, left-hand side of the
machine is visible
The tightening torque of the bolts on the mirror is 4.5 –
5.5 N·m (3.3 – 4.1 lb ft)
NOTICE: After you install and position all of the mirrors,
check the visibility around the machine from the operator's
seat. Set the seat into the desired position, and make
sure to confirm all the reference views in the mirrors. If
necessary, fine tune the positioning of the mirrors in order
to ensure proper visibility around the machine.
Right mirror (B)
Install the mirror as shown.
The dimension (L1) is 335 mm (13.2 in).
The dimension (L2) is 115 mm (4.5 in).
Position the mirror so that the rear, right-hand side of the
machine is visible.
The tightening torque of the bolts on the mirror is 4.5 –
5.5 N·m (3.3 – 4.1 lb ft)
NOTICE: After you install and position all of the mirrors,
check the visibility around the machine from the operator's
seat. Set the seat into the desired position, and make
sure to confirm all the reference views in the mirrors. If
necessary, fine tune the positioning of the mirrors in order
to ensure proper visibility around the machine.
3 - CONTROLS AND INSTRUMENTS
3-53
3
SMIL18CEX3085AA
4
SMIL18CEX3086AA
5
SMIL18CEX3112AA
6
SMIL18CEX3113AA
Advertisement
Table of Contents
