Case CX130C Operator's Manual page 139

Loading the machine on a rear loading type trailer (without front equipment installed)
WARNING
Tip-over hazard!
The counterweight MUST be removed before transporting the machine without an attachment. Con-
sult you dealer.
Failure to comply could result in death or serious injury.
WARNING
Pressurized system!
Before removing the attachment from the machine, make sure the air pressure and hydraulic oil pres-
sure are at zero.
Failure to comply could result in death or serious injury.
If the machine has to be transported without the complete front equipment (boom and arm), the counterweight should
be removed from the base machine. Loading the base machine on the trailer with the counterweight installed affects
the stability of the base machine itself, and definitely compromises its climbing ability.
NOTICE: The use of lifting systems is necessary for removal and installation of the machine front attachment and of
the counterweight. Refer to your CASE CONSTRUCTION dealer for proper removal and installation procedure.
CX130C – CX130C LC
Select the H work mode.
Align the machine to the trailer, so as the travel motors
face the trailer ramps.
NOTICE: Starting from this position, the travel control
levers must be pulled backward to move on the ramps
and on the trailer bed. Confirm the travel control direc-
tions before start moving onto the ramps.
Slowly climb the trailer ramps. Slowly travel on the trailer
bed to reach the resting position.
Slowly turn the upper structure 180°.
5 - TRANSPORT OPERATIONS
5-5
W0260A
W0284A
10
SMIL13CEX2721AB
11
SMIL20CEX0029AB