Front Guard Protective System - Case CX130C Operator's Manual

Front Guard Protective System

The Front Guard Protective Structure (FGPS) must be
installed if the machine is operated in conditions where
there is a risk of projection of rocks or debris towards the
front of the cab, or a risk of collision of heavy objects with
the front of the cab.
Two types of FGPS are available: a FGPS compliant to
Level 1 as defined by ISO 10262, or a FGPS compliant to
Level 2 as defined by ISO 10262.
Level 1 FGPS (1) is intended for protection from small
rocks, light debris, wood chips, and other light objects
encountered in applications such as construction site
services, secondary sorting of crushed materials, roads
maintenance, waste rehandling, landscaping.
NOTICE: The upper part of the Level 1 FGPS can be
opened so to ease cleaning and maintenance of the wind-
shield. Never start machine operation with the upper part
of the FGPS opened. Failing to comply may result in
death or serious injury.
Level 2 FGPS (2) is intended for protection from heavy
stones, rock or concrete blasts, steel scrap, logs and other
heavy objects encountered in applications such as quarry,
mining, primary and secondary demolition, scrap loading,
log stacking.
The protective structures, the fitting supports and fasten-
ing elements on the machine are all parts of an integrated
protective system.
Never make modifications, or drill holes, or weld parts on
protective structures. Doing so will result in death or seri-
ous injury.
Never attach any device to the protective structures for
pulling purposes. Doing so will lead to serious damages
to the protective structures.
After a fire, a collision, or a tip-over, or in case of corrosion,
the cab protective structures shall be carefully checked for
damages by specialised and qualified personnel. More-
over, all damaged parts must be replaced with genuine
spare parts, in order to return the protective system to its
original condition. Make sure to match the part number
of each protective structure. Immediately call the CASE
CONSTRUCTION dealer for inspection of the conditions
of the cab's protective structures, or to get parts or entire
structures replaced.
9 - ACCESSORIES
9-23
1
SMIL17CEX6873BA
2
SMIL17CEX6872BA