Case CX130C Operator's Manual page 140

CX130C with blade
Select the H work mode.
Align the machine to the trailer, so as the blade faces the
trailer ramps. Fully raise the blade.
NOTICE: Starting from this position, the travel control
levers must be pushed forward to move on the ramps and
on the trailer bed. Confirm the travel control directions
before start moving onto the ramps.
Slowly climb the trailer ramps. Slowly travel on the trailer
bed to reach the resting position.
After reaching the resting position, lower the blade on the
supporting block.
Make sure that there is enough space between the block
and the tracks to route the tie-down chains.
Slowly turn the upper structure 180°.
5 - TRANSPORT OPERATIONS
5-6
12
SMIL20CEX0024AA
13
SMIL20CEX0031AA
14
SMIL19CEX2664AA
15
SMIL20CEX0028AB