Table of Contents
Advertisement
Fuel system bleeding
NOTICE: take all necessary precautions during the following operations; no foreign matter must enter the fuel system.
NOTICE: when you deal with fuel, please do not bring fire close. After exchange of the filter and scupper of fuel
should wipe off the fuel which fell.
NOTICE: do not work in any environment in which anything other than fuel will get into fuel lines. (Sites with strong
wind, blowing dust, etc.). Wash hands before operations. Do not use gloves. Do not open the packaging for the filter
kit until you start the installation work. Do not reuse any fuel remaining within the cover. For persistent dirt within
the cover, wipe it off with a clean rag, then clean with clean diesel fuel. Do not use parts cleaner because it could
affect the case cover. Do not touch the inside of the element. Completely wipe off any spilt fuel after changing a filter
element or ing the system.
NOTICE: When the fuel tank has been emptied after re-
placement and/or draining water of the pre-fuel filter or
the fuel filter (3) has been carried out, be sure to air as
this may prevent fuel flow because of air entering inside.
(1) Fuel filter
(2) Air bleed plug
(3) Priming pump
(4) Fuel pre-filter
(5) Air bleed plug
(6) Additional fuel pre-filter (if equipped)
(7) Air bleed plug
6 - MAINTENANCE
6-9
1
SMIL17CEX0179AA
2
SMIL18CEX1667BB
Advertisement
Table of Contents
