Stopping The Unit; Stopping The Engine - Case CX130C Operator's Manual

Stopping the unit

Stopping the engine

1. Lower the attachment until it is resting on the ground.
2. Turn the engine throttle (1) to low idle position.
3. Let the engine run for about 5 min.
NOTICE: If the engine is stopped suddenly, the lubri-
cated section on the turbocharger gets dried from the
high heat, leading to a turbocharger failure.
4. Turn the starter key (2) to OFF position.
Emergency stop switch
In the event of an emergency or if it is not possible to stop
the engine using the starter key, press the emergency
stop switch on the left-hand console.
NOTE: This switch should only be used in case of an
emergency. Do not use it on a day-to-day basis to stop
the engine.
4 - OPERATING INSTRUCTIONS
4-15
1
SMIL15CEXY892AB
2
SMIL14CEX2520AA