Table of Contents
Advertisement
8. If the right-hand auxiliary pedal is equipped, place the
locking pin of the pedal in outward position.
9. Press one side of the right-hand pedal to close the
crusher jaws, and press the other side of the pedal to
open the crusher jaws. The crushing force increases
with the pressing on the pedal in the closing direction.
Release the pedal to hold the crusher jaws in position.
NOTICE: in bucket mode, do not carry out operation us-
ing auxiliary line. If you do that, the warning message
"Auxiliary set-up required" will be displayed with intermit-
tent whistle sound. Stop operation immediately and carry
out auxiliary set-up.
NOTICE: the auxiliary pedal shall always be locked when
not in use.
To lock the auxiliary pedal, engage the locking pin (1) in
the locking hole (2).
10. If the proportional controls on the right-hand lever are
equipped, slide up and down the proportional switch
and confirm the control direction to open the crusher
and the control direction to close the crusher. The
crushing force increases with the sliding of the pro-
portional switch in the closing direction. Release the
switch to hold the crusher jaws in position.
9 - ACCESSORIES
9-6
13
VSLYI8-004
14
VSLYI8-005A
15
SNKQ6K-003A
16
SMIL15CEXY965AB
Advertisement
Table of Contents
