Table of Contents
Advertisement
Preset 3 - long press
Preset 4 - short press
Preset 4 - long press
Preset 5
Volume adjustment button Volume up
Volume adjustment button Volume down
Bluetooth
- Push the "MODE" button (8) to switch the audio source
until the message "BT" is shown on the display.
- Pair the Bluetooth device. For details on pairing, refer
to " Bluetooth Pairing"
- For details on how to use a mobile phone connected via
Bluetooth , refer to " Use of Cellular Phone Connected via
Bluetooth"
Button functions with Bluetooth selected as an audio
source:
Preset 3 - short press
Preset 4 - short press
Preset 5
Volume adjustment button Volume up
Volume adjustment button Volume down
Bluetooth Pairing
NOTICE: To use Bluetooth audio devices, the devices to
be connected with a wireless connection must be regis-
tered in advance. This registration is called pairing. If a
device has never been paired, pairing must be performed.
1. With "BT" shown on the display, hold down the "AUTO
PRESET" button (5) . The "WA" message is shown on
the display and the unit proceeds to pairing prepara-
tion.
3 - CONTROLS AND INSTRUMENTS
Fast forward (while being
pressed)
Next track
Rewind (while being
pressed)
Play/pause
Previous track
Next track
Play/pause
2. When pairing preparation is complete, the message
"PA" is shown on the display and the unit enters pairing
standby status.
3. Search for the device to pair such as a mobile phone
or a portable audio device.
4. When pairing is completed successfully, the message
"PO" is shown on the display. If pairing is not com-
pleted within a time limit (180 seconds) or an error oc-
curs, the message "P×" is shown on the display. If
pairing is failed, repeat from step 1 to perform paring.
Use of Cellular Phone Connected via Blue-
tooth
- When the paired cellular phone receives a call, the mes-
sage "CL" blinks on the display and the speaker will play
the ringtone. Even if the radio is switched off, it turn au-
tomatically on.
- To answer to the call, push any kind of radio button ex-
cept from the "POWER" (1) and the volume buttons / .
- To reject a call, press the "POWER" button (1) . The
call is interrupted and the radio is restored to its previous
state.
- To adjust the speaker volume during the call, push the
volume adjustment buttons / . To turn on/off the micro-
phone, push the "PRESET" button (6) .
- Push the "POWER" button (1) to terminate a call. The
radio is restored to its previous state.
- Hold down the "MODE" button (8) to redial. The mes-
sage "RE" is shown on the display for 3 seconds. After
redialling, the message "DL" flashes on the display and a
phone ring sound is played from the speaker.
Memory Erasure
Disconnecting the battery from the vehicle electrical cir-
cuit, the radio lose the stored radio stations in the Preset
buttons 1-6.
3-46
Advertisement
Table of Contents
