Table of Contents
Advertisement
Loads handling chart
1.: Lift capacities shown should not be exceeded. The
weight of all lifting accessories and the weight of all
other auxiliary attachment devices such as couplers and
thumbs must be deducted from the above lift capacities.
2.: Lift capacities are based on the machine sitting on
a firm uniform level supporting surface. The user must
take allowances for job conditions such as soft or uneven
ground.
3.: Lift capacities shown do not exceed 75% of the mini-
mum tipping loads or 87% of the hydraulic capacities. Ca-
pacities marked with an asterisk are limited by hydraulic
capacities.
4.: Lift capacities shown are with automatic power boost
engaged.
9 - ACCESSORIES
4
SMIL20CEX2413FA
5.: The least stable position is over the side.
6.: The operator should be fully acquainted with the
CASE CONSTRUCTION operator's manual before oper-
ating the machine.
7.: Lift capacities apply only to excavators as origi-
nally manufactured and normally equipped by CASE
CONSTRUCTION. Lift capacities must be adjusted for
excavators equipped with buckets other than that spec-
ified on the lift chart and for excavators equipped with
thumbs and couplers.
8.: Lift capacity ratings are based on ISO 10567, reissued
2007 "Hydraulic Excavators Lift Capacity".
9-17
Advertisement
Table of Contents
