Table of Contents
Advertisement
Alternative display layout in case of rear view camera in-
stalled.
8. If the right-hand auxiliary pedal is equipped, engage
the locking pin (1) of the pedal in the guiding hole (3).
9. Press and hold the front side of the right-hand pedal
to full stroke in order to operate the hydraulic breaker
with the continuous selected flow providing a constant
blowing frequency. Release the pedal to stop breaker
operation.
NOTICE: in Bucket mode, do not carry out operation using
auxiliary line. If you do that the warning message "Auxil-
iary set-up required" will be displayed with alarm sound.
Stop operation immediately and carry out auxiliary set-up.
NOTICE: the auxiliary pedal shall always be locked when
not in use.
To lock the auxiliary pedal, engage the locking pin (1) in
the locking hole (2).
9 - ACCESSORIES
9-3
4
SMIL18CEX0557AA
5
SNKQ6K-002A
6
VOHLGR-005
7
SNKQ6K-003A
Advertisement
Table of Contents
