Table of Contents
Advertisement
FUEL CONSUMPTION INDICATOR setting
The fourth tab of the user information mode allows to set
the display of the fuel consumption indicator.
Press the button (1) or (2) to set the fuel consumption
indicator ON or OFF.
If other settings are needed, press the button (3) to scroll
down to the next tab.
Otherwise, press the button (4) to confirm the selection
and to reset the operating mode of the display.
MAINTENANCE INFORMATION setting
The fifth tab of the user information mode allows to set the
time sheet of the main maintenance operations.
Press the button (2) to show the setting pages.
Press the button (1) or (2) to select the page that includes
the intended maintenance operation.
NOTE: the main maintenance operations are included
into the pages 1, 2, and 3.
Press the button (3) or (5) to select the intended mainte-
nance operation into the page. If service is due shortly,
the remaining time is displayed in yellow. If the due tim-
ing for service has passed, the delay is displayed in red.
As the intended maintenance operation has been per-
formed, press and hold the button (2) to reset the remain-
ing time to the next service. An alarm sounds to confirm
the reset.
When the time sheets have been set, press the button (4)
to return to the user information mode.
If other settings are needed, press the button (3) to scroll
down to the next tab.
Otherwise, press the button (4) to reset the operating
mode of the display.
3 - CONTROLS AND INSTRUMENTS
3-38
16
Y2Q5JH-002
17
NB1Y5Z-004Z
18
NB1Y5Z-005Z
Advertisement
Table of Contents
