Victoria Arduino Eagle One Prima Service Manual page 11

1. 2 SAF ET Y R EG UL AT I ON S
Read this book carefully. It provides
important information concerning safe-
ty of installation, use and maintenance.
Save it carefully for future reference.
All illustrations contained in this man-
ual are meant for information purposes
only.
Your machine may differ slightly from
the one shown here.
Simonelli Group reserves the right to
make changes to production and to
the manual without any obligation to
update previous production and man-
uals accordingly.
After unpacking, make sure the appli-
ance is complete. In case of doubts, do
not use the appliance, but contact a
qualified technician. Packaging items
which are potentially dangerous (plastic
bags, polystyrene foam, nails, etc.) must
be kept out of children's reach and must
not be disposed of in the environment.
RISK OF POLLUTION
02 02
This machine could be installed in loca-
tions where its use and maintenance is
done by trained personnel or in house-
hold and similar applications such as:
staff kitchen areas in shops, offices
•
and other working environments;
• farm houses;
by clients in hotels, motels and other
•
residential type environments;
• bed and breakfast type environ-
ments.
M M M A A A C C C H H H IN N N E E E
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
D D D E E E S S S C C C R I R R I P P P T T T IO O O N N
Before turning ON the machine make
certain that the rating indicated on
the label matches the available power
supply. The nameplate can be seen
inside the machine when removing the
drip tray.
The machine must be installed accord-
ing to the applicable federal, state and
local standards (codes) in force with
regard to plumbing systems includ-
ing back-flow prevention devices. For
this reason, the plumbing connec-
tions must be carried out by a qualified
technician. The warranty expires if the
characteristics of the power supply do
not correspond to the nameplate data.
The appliance must be installed
according to the applicable federal/
national/local standards (codes) con-
cerning the hydraulic systems includ-
ing back-flow devices. Owing to the
above, the hydraulic connections must
be carried out by a skilled technician.
The warranty will be rendered null and
void in case the features of the power
supply do not match the plate data.
In case of installation in kitchens, con-
nect the equipotential conductor to the
terminal on the machine indicated by
the symbol .
The manufacturer is not held respon-
sible for possible damage caused by
failure in earthing the plant. For the
electrical safety of the appliance, it is
necessary to equip the system with the
proper grounding. This must be carried
out by a qualified electrician who must
ensure that the electric power of the
system is sufficient to absorb the max-
imum power input stated on the plate.
03 03
01
11