Important Safety Information - ProSoft Technology CompactLogix MVI69E-MBS User Manual

MVI69E-MBS ♦ CompactLogix™ Platform
Modbus Serial Enhanced Communication Module

Important Safety Information

North America Warnings
A This Equipment is Suitable For Use in Class I, Division 2, Groups A, B, C, D or Non-Hazardous
Locations Only.
Warning – Explosion Hazard – Substitution of Any Components May Impair Suitability for Class I,
B
Division 2.
Warning – Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been Switched Off Or
C
The Area is Known To Be Non-Hazardous.
D The subject devices are powered by a Switch Model Power Supply (SMPS) that has regulated output
voltage of 5 VDC.
ATEX/IECEx Warnings and Conditions of Safe Usage:
Power, Input, and Output (I/O) wiring must be in accordance with the authority having jurisdiction.
A Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring
modules.
B Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the
area is known to be non-hazardous.
C These products are intended to be mounted in an ATEX/IECEx Certified, tool-secured, IP54 enclosure.
The devices shall provide external means to prevent the rated voltage being exceeded by transient
disturbances of more than 40%. This device must be used only with ATEX certified backplanes.
D Before operating the reset switch, be sure the area is known to be non-hazardous.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer
or supplier for further information.
Warning – Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Agency Approvals & Certifications
Please visit our website:
ProSoft Technology, Inc.
www.prosoft-technology.com
Contents
User Manual
Page 3 of 159