ProSoft Technology CompactLogix MVI69E-MBS User Manual page 103

MVI69E-MBS ♦ CompactLogix™ Platform
Modbus Serial Enhanced Communication Module
4 In the Connection Setup dialog box, click B
Discovery Service. Right-click the module and choose A
The module's default IP address is usually 192.168.0.250. Choose an unused IP
5
within your subnet, and then click OK.
Important: The temporary IP address is only valid until the next time the module is initialized. For
information on how to set the module's permanent IP address, see Ethernet 1 (page 47).
6 Close the ProSoft Discovery Service window. Enter the temporary IP address in the
E
THERNET ADDRESS
C
ONNECTION
7 If the Test Connection is successful, click C
accessible.
ProSoft Technology, Inc.
field of the Connection Setup dialog box, then click T
to verify that the module is accessible with the current settings.
Diagnostics and Troubleshooting
D ( ) to start ProSoft
ROWSE EVICE S
T
SSIGN EMPORARY
. The Diagnostics window is now
ONNECT
User Manual
IP.
EST
Page 103 of 159