Important Safety Information - ProSoft Technology MVI69L-MBTCP User Manual

MVI69L-MBTCP ♦ CompactLogix™ Platform
Communication Module

Important Safety Information

North America Warnings
A This Equipment is Suitable For Use in Class I, Division 2, Groups A, B, C, D or Non-Hazardous
Locations Only.
Warning – Explosion Hazard – Substitution of Any Components May Impair Suitability for Class I,
B
Division 2.
Warning – Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been Switched Off Or
C
The Area is Known To Be Non-Hazardous.
D The subject devices are powered by a Switch Model Power Supply (SMPS) that has regulated output
voltage of 5 VDC.
ATEX Warnings and Conditions of Safe Usage:
Power, Input, and Output (I/O) wiring must be in accordance with the authority having jurisdiction
A Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring
modules.
B Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the
area is known to be non-hazardous.
C These products are intended to be mounted in an IP54 enclosure. The devices shall provide external
means to prevent the rated voltage being exceeded by transient disturbances of more than 40%. This
device must be used only with ATEX certified backplanes.

DO NOT OPEN WHEN ENERGIZED
Agency Approvals & Certifications
Please visit our website:
ProSoft Technology, Inc.
www.prosoft-technology.com
Contents
User Manual
Page 3 of 139