Important Safety Information - ProSoft Technology MVI69E-GSC User Manual

MVI69E-GSC ♦ CompactLogix™ or MicroLogix™ Platform
Generic ASCII Serial Communication Module

Important Safety Information

North America Warnings
A This Equipment is Suitable For Use in Class I, Division 2, Groups A, B, C, D or Non-Hazardous Locations
Only.
Warning – Explosion Hazard – Substitution of Any Components May Impair Suitability for Class I, Division 2.
B
Warning – Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been Switched Off Or The
C
Area is Known To Be Non-Hazardous.
D The subject devices are powered by a Switch Model Power Supply (SMPS) that has regulated output
voltage of 5 VDC.
ATEX/IECEx Warnings and Conditions of Safe Usage:
Power, Input, and Output (I/O) wiring must be in accordance with the authority having jurisdiction.
A Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring
modules.
B Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area
is known to be non-hazardous.
C These products are intended to be mounted in an ATEX/IECEx Certified, tool-secured, IP54 enclosure. The
devices shall provide external means to prevent the rated voltage being exceeded by transient disturbances
of more than 40%. This device must be used only with ATEX certified backplanes.
D Before operating the reset switch, be sure the area is known to be non-hazardous.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.
Agency Approvals & Certifications
Please visit our website:
ProSoft Technology, Inc.
www.prosoft-technology.com
Contents
User Manual
Page 3 of 87