Adding Another Module In Studio 5000 - ProSoft Technology CompactLogix MVI69E-MBS User Manual

MVI69E-MBS ♦ CompactLogix™ Platform
Modbus Serial Enhanced Communication Module

2.5.2 Adding Another Module in Studio 5000

You can place multiple MVI69E-MBS modules in the same rack provided it does not
exceed the power distance rating of the CompactLogix or MicroLogix 1500-LRP rack
(see System Requirements (page 8)). Adding an additional module to the rack is similar
to installing a new module; however, the name of the module must be unique.
1 Start Studio 5000 and open the project.
2 In Studio 5000, locate the I/O C
and choose N
3 In the Select Module Type dialog box, select the MVI69E-MBS module.
If you are using an Add-On Profile (AOP), this adds the MVI69E-MBS module
o
and configures the relevant parameters. You must be using RSLogix version 15
or later to to use an AOP.
If using an AOP is not an option, select G
o
ProSoft Technology, Inc.
ONFIGURATION
M .
EW ODULE
Configuring the Module in RSLogix
folder. Right click C
OMPACT
1769 M
ENERIC ODULE
User Manual
B L
US OCAL
and click C .
REATE
Page 31 of 159