Important Safety Information - ProSoft Technology ControlLogix MVI56E-SMGC User Manual

MVI56E-SMGC ♦ ControlLogix™ Platform
Enhanced FMC722 TPU General Communication Module

Important Safety Information

North America Warnings
Warning – Explosion Hazard – When in hazardous locations, turn off power before replacing or wiring
A
modules.
Warning – Explosion Hazard – Substitution of Any Components May Impair Suitability for Class I,
B
Division 2.
Warning – Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been Switched Off Or
C
The Area is Known To Be Non-Hazardous.
D Class 2 Power
ATEX Warnings and Conditions of Safe Usage:
Power, Input, and Output (I/O) wiring must be in accordance with the authority having jurisdiction.
A Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring
modules.
B Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the
area is known to be non-hazardous.
C These products are intended to be mounted in an ATEX Certified, tool-secured, IP54 enclosure. The
devices shall provide external means to prevent the rated voltage being exceeded by transient
disturbances of more than 40%. This device must be used only with ATEX certified backplanes.
D Before operating the reset switch, be sure the area is known to be non-hazardous.
E If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Agency Approvals & Certifications
Please visit our website:
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer
or supplier for further information.
Warning – Cancer and Reproductive Harm – www.P65Warnings.ca.gov
ProSoft Technology, Inc.
www.prosoft-technology.com
Contents
User Manual
Page 4 of 98