Displaying The Current Monitor Configuration - HP Visualize c3700 Owner's Manual

Displaying the Current Monitor Configuration
To display the current monitor configuration for your system from the
Configuration Menu of the boot console interface, follow the directions in
"Accessing the Boot Console Interface" earlier in this chapter. Once you
are in the Boot Console Interface Main Menu, type the following
command and press
Main Menu: Enter command> configuration
This places you in the Configuration Menu. From here, type the following
command at the prompt and press
Configuration Menu: Enter command> monitor
The message on your display is a list of the current graphics adapters
and their monitor types configured for your workstation.
MONITOR INFORMATION
Path Slot Head
---------- ---
GRAPHICS(2) 2
Configuration Menu: Enter command>
In this example, only the graphics adapter (located in slot 2)
GRAPHICS(2) is configured. The monitor type for GRAPHICS(2) is set to
type 1, which is a 1280 1024 monitor that uses a frequency of 75 Hz.
Chapter 5
Displaying and Setting the Monitor Type
:
Enter
:
Enter
HPA Resolution Freq Type Class
--- ------- ---------- ----
1 fffa000000 1280x1024 75Hz
The Boot Console Interface
---
1
---
PCI
165