Using The Xmcd Utility - HP Visualize c3700 Owner's Manual

Using the xmcd Utility

The instructions in the section assume that you are using the HP-UX
10.20 operating system
Enhancements (ACE) for HP-UX 10.20 (December 1999) with the HP
CDE interface. The xmcd utility must also be installed on your system.
See the section "Installing the xmcd Utility."
To load and play an audio CD, follow the steps in this procedure.
1. Load the audio CD. See the section "Loading a CD" in this chapter.
2. Insert the headphone plug into the headphone jack located on the
back of your system unit.
Line Input Jack
Line Output Jack
Microphone Jack
Headphone Jack
3. Click on the Audio icon located on your HP CDE control panel.
Audio Icon
Chapter 2
Audio Control for the CD Drive
and the Workstation
Using Your CD Drive
Additional Core
57