HP Visualize c3700 Owner's Manual page 110

Changing Your Workstation's Hardware Configuration
Removable Media Devices
2. Remove the floppy disk drive bay's rear cover by unscrewing the T-15
Figure 4-30 Removing the Floppy Disk Drive Bay's Rear Cover
Power Cable
Rear Cover
110
Torx/slotted screw as shown in Figure 4-30. Note that the floppy disk
drive bay's rear cover is located on the rear of the removable media
chassis inside the workstation. Push the cover handle away from the
rear of the removable media chassis approximately one inch. Next
pull the cover handle toward you. Remove the floppy data and power
cables from their connectors.
Rear Cover Handle
Data Cable
T-15
Torx/Slotted
Screw
Chapter 4