NOTE
Figure 4-27
Changing Your Workstation's Hardware Configuration
Removable Media Devices
chassis as shown in Figure 4-26.
7. Plug the floppy power cable into its connector. Next, plug the data
cable into its connector. Note that the connectors are keyed for proper
insertion. See Figure 4-27.
The red striped side of the floppy data cable is positioned toward the
power cable.
Plugging in the Floppy Data and Power Cables
Power
Cable
8. Tighten the two floppy disk drive bracket screws as shown in Figure
4-28.
106
Data Cable
Chapter 4