HP Visualize c3700 Owner's Manual page 36

NOTE
NOTE
Overview
Getting Started
3. A series of messages are displayed as various hardware and software
subsystems are activated.
During the initial boot process you will be asked to:
• Select a monitor type
• Select the appropriate keyboard type
4. Enter the required information about your workstation when
prompted for it. This is the information you gathered in the previous
subsection, such as your workstation's hostname, IP address, and
time zone.
You should enter the hostname when requested; otherwise, you will get
an error message when you log in.
If you do not have other required pieces of information, press
the default value. You can provide missing information later by logging
into a terminal emulator window as root and executing this command:
/sbin/set_parms
5. Specify the root password when prompted for it. The root password
is the password used for the superuser account. (The superuser, root,
is a special user who has permission to perform all system
administration tasks.)
When you have finished answering all of the questions, the
workstation completes its start-up sequence and displays the HP
CDE login screen.
6. Log into your first HP CDE session as root. For information on
logging into HP CDE, see the Common Desktop Environment User's
Guide.
You must log into the first session as root. This is because the system
contains no other user accounts. Once you have created user accounts,
you should log out as root and log back in as one of the other users.
36
to use
Enter
Chapter 1