HP Visualize c3700 Owner's Manual page 113

5. Place the floppy disk blank in the floppy disk bracket and insert the
Figure 4-33 Installing the Floppy Disk Blank and Bracket
6. Slide the floppy disk blank and its bracket into the workstation
Chapter 4
Changing Your Workstation's Hardware Configuration
four floppy disk mounting screws (T-15 Torx/slotted screws) into the
bracket and tighten. See Figure 4-33.
Floppy Disk
Mounting
Screws
(quantity 4)
chassis as shown in Figure 4-33.
Floppy Disk Blank
Removable Media Devices
Floppy Disk
Bracket
Bracket Screw
113