NOTE
NOTE
• Optional font server parameters
You need to supply these parameters if you want the workstation to
obtain its fonts from a network server. Ask your system administrator
if you need to configure these parameters.
Font server name
Font server IP address
Powering on the Workstation for the First Time
After you have connected the various parts of your workstation by
following the HP V
ISUALIZE
power on the workstation.
Your B2000 workstation may be powered on in the minitower, upright
position, or powered on while laying on the right-side panel.
The HP Instant Ignition process has already installed the HP-UX
operating system on your workstation. When you power on the
workstation, you will be presented with a series of questions. When you
have answered these questions, the HP CDE login screen will appear.
Once the HP CDE login screen appears, you can log in as root—initially
there is no password.
Follow these steps when powering on your B2000 workstation for the
first time:
1. Power on the monitor and any external peripherals (for example,
printers) that are connected to the workstation.
2. Power on the workstation.
The workstation will run a series of self-tests.
Your display monitor may appear blanked for a few moments while the
system is booting. Messaging will appear in approximately two minutes.
Chapter 1
__________________________
__________________________
B2000 Installation Card, you are ready to
Overview
Getting Started
35