HP Visualize c3700 Owner's Manual page 125

3. Remove the four T-15 Torx shoulder screws from the hard disk drive
Figure 4-44 Removing the Hard Disk Drive from Its Bracket
Chapter 4
Changing Your Workstation's Hardware Configuration
and bracket. See Figure 4-44. You should be careful when removing
the hard disk drive from its mounting bracket to avoid damaging it.
Note that in order to remove the T-15 Torx screws from the sides of
the hard disk drive you will have to have a T-15 Torx driver that is
long enough to fit through the access holes on the sides of the hard
disk drive bracket.
T-15 Torx
Shoulder Screw
Hard Disk Drives
Mounting Grommets
(do not remove)
125