The Boot Console Interface
Displaying and Setting the Monitor Type
The correct usage for setting the graphics configuration is:
monitor graphics_path type
where valid graphics_path parameters are:
Built-in (or core) graphics adapter (primary slot)
graphics(0)
Graphics adapter installed in slot 1 (secondary slot)
graphics(1)
Graphics adapter installed in slot 2
graphics(2)
Graphics adapter installed in slot 3
graphics(3)
Graphics adapter installed in slot 4
graphics(4)
and type is the numerical monitor type. See "Setting the Monitor Type"
in a subsequent section for a list of types. For example, an HP V
fxe graphics card (A4982A) installed in option slot 2 would be
Note
graphics(2).
graphics(4) for your graphics_path.
164
that
you
can
have
ISUALIZE
through
graphics(0)
Chapter 5
Need help?
Do you have a question about the Visualize c3700 and is the answer not in the manual?