Setting The Monitor Type From The Boot Console Interface; Setting The Monitor Type Using Sam - HP Visualize c3700 Owner's Manual

Changing Your Workstation's Hardware Configuration
Monitor Type
Setting the Monitor Type from the Boot Console
Interface
To change your system's graphics parameters before you replace your
monitor, go to the section "Displaying and Setting the Monitor Type" on
page 163 in Chapter 5.

Setting the Monitor Type Using SAM

This method for setting the monitor type requires the use of the HP CDE
interface. This means that you should have already set your monitor
type using one of the methods defined in a previous section, or you have
an Instant Ignition workstation that boots up using the HP CDE
interface.
To use the System Administration Manager (SAM) to set the monitor
type, follow the steps in this procedure:
1. Log in as root.
2. Move the mouse pointer to the Application Manager control for tools
and click the left mouse button. Alternatively you can execute sam at
a terminal window command prompt and skip to step 5.
3. Double click on the System_Admin icon in the Application
Manager window.
142 Chapter 4