HP Visualize c3700 Owner's Manual page 162

NOTE
The Boot Console Interface
Displaying and Setting Paths
To display the current setting for a particular system path, follow the
directions in "Accessing the Boot Console Interface" earlier in this
chapter, and then type the following at the prompt and press
Main Menu: Enter command> path path_type
where path_type is one of the path types listed in Table 5-1.
For example, to get the path to the primary boot device, follow the
directions in "Accessing the Boot Console Interface" earlier in this
chapter, and then type the following at the prompt and press
Main Menu: Enter command> path primary
To set a system path to a new value, follow the directions in "Accessing
the Boot Console Interface" earlier in this chapter, and then type the
following at the prompt and press
Main Menu: Enter command> path path_type path
where path_type is one of the path types listed in Table 5-1 and path is
the specification of the path in Mnemonic Style Notation (as described in
Table 5-2). For example, to set the primary boot path to a SCSI disk with
ID of 6.0, follow the directions in "Accessing the Boot Console Interface"
earlier in this chapter, and then type the following at the prompt and
press :
Enter
Main Menu: Enter command> path pri scsi.6.0
The default B2000 paths are:
pri scsi.6.0
alt scsi.5.0
162
:
Enter
:
Enter
:
Enter
Chapter 5