Activate Or Deactivate Alerts; Delete Alerts - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Switch

Activate or Deactivate Alerts

Use the following steps to activate or deactivate existing threshold alerts. In the active
state, notifications are generated for the alert. In the inactive state, notifications do not
occur.
1. Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays. The port's current state,
deactive or active, is listed under the State column.
2. To change the state, select the alert by selecting the alert information in the table.
3. If the alert is active, select Deactivate to change to the deactive state. If the alert is
deactive, select Activate to change to the active state.

Delete Alerts

Use the following steps to delete existing threshold alerts.
1. Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays.
2. Select the alert that you want to delete by selecting the alert information in the
table.
3. Select Delete.
A message displays asking you to confirm the deletion.
4. Select Yes.
The alert is removed from the dialog box.
3–26 edge switch 2/24 product manager user guide