Cp6003-Rc Board-Specific Information - Kontron CP6003-RA/RC User Manual

CP6003-RA/RC
1.3

CP6003-RC Board-Specific Information

The CP6003-RC is a rugged conductive-cooled CompactPCI single-board computer without
front I/O. It is based on the 2
for use in highly integrated platforms with solid mechanical interfacing for a wide range of
industrial environment applications.
Some of the CP6003-RC's outstanding features are:
• Support for the following 2
• Quad-core Intel® Core™ i7-2715QE (SV), 2.1 GHz, 6 MB L3 cache
• Dual-core Intel® Core™ i7-2655LE (LV), 2.2 GHz, 4 MB L3 cache
• Intel® QM67 Express chipset
• Up to 16 GB, dual-channel, soldered DDR3 SDRAM memory with ECC running at 1333 MHz
• Integrated 3D high-performance graphics controller with up to three high-resolution graph-
ics interfaces (VGA / 2 x HDMI/DVI)
• 64-bit/66 MHz PCI or PCI-X CompactPCI interface (PICMG 2.0)
• One conductive-cooled PMC slot with PCI functionality and rear I/O support; 64-bit/66
MHz PCI interface or 64-bit/133 MHz PCI-X interface
• One conductive-cooled XMC slot utilizing a x8 lane PCI Express 2.0 interconnection
• Four Gigabit Ethernet interfaces:
• Two Gigabit Ethernet interfaces on rear I/O with disable option in uEFI BIOS
• Two Gigabit Ethernet interfaces on rear I/O (PICMG 2.16)
• One Gigabit Ethernet controller:
• One Intel® 82580EB Quad Gigabit Ethernet controller connected to the Gigabit Ether-
net ports on the rear I/O
• Five Serial ATA interfaces with SATA RAID 0/1/5/10 support:
• One onboard SATA 6 Gb/s interface for the Serial ATA Flash module
• Four SATA 3 Gb/s interfaces on the rear I/O
• Four USB ports on the rear I/O
• Two COM ports:
• One RS-232 COM port on the rear I/O (COMA)
• One RS-422/RS-232 COM port on the rear I/O (COMB)
• TCG 1.2 compliant Trusted Platform Module (TPM), on request
• Two SPI boot flashes:
• One standard SPI boot flash
• One recovery SPI boot flash
• Four general purpose inputs (GPI) and four general purpose outputs (GPO) on rear I/O
• Watchdog timer
• Supports PICMG Packet Switching Backplane Specification 2.16
• IPMI support
• 4HP, 6U CompactPCI
• Passive heat sind solution for conductive-cooling
• Rear I/O on J3, J4 and J5
• AMI Aptio®, a uEFI-compliant platform firmware
ID 1046-3890, Rev. 1.0
nd
generation Intel® Core™ i7 processor and specifically designed
nd
generation processors:
Introduction
Page 1 - 5