Functional Description
2.10.14
CompactPCI Bus Connector
The complete CompactPCI connector configuration
comprises up to five connectors designated as J1 to J5.
Their functions are as follows:
• J1/J2: 64-bit CompactPCI interface with PCI bus
signals, arbitration, clock and power
• J3, J4 and J5 have rear I/O interface functionality
• only J4 has rear I/O functionality from the PMC/
XMC module
The CP6003-RA/RC is designed for a CompactPCI bus
architecture. The CompactPCI standard is electrically
identical to the PCI local bus. However, these systems
are enhanced to operate in rugged industrial environ-
ments and to support multiple slots.
2.10.14.1 CompactPCI Connector Keying
The CompactPCI connectors support guide lugs to en-
sure a correct polarized mating.
The CP6003-RA/RC supports universal PCI VI/O signal-
ing voltages with one common termination resistor con-
figuration and includes a PCI VI/O voltage detection
circuit. If the PCI VI/O voltage is 5 V, the maximum sup-
ported PCI frequency is 33 MHz.
Page 2 - 24
CP6003-RA/RC
Figure 2-7: CompactPCI Con.
J1-J5
22
J5
1
25
J4
1
19
J3
1
22
J2
1
25
J1
N o te :
1
P in r o w F : G N D
P in r o w Z : N C
F
ID 1046-3890, Rev. 1.0
E D C B A
Z