Introduction
Table 1-2:
CP6003-RA/RC Main Specifications (Continued)
FEATURES
uEFI BIOS
Software IPMI
Operating Systems
Page 1 - 18
AMI Aptio®, AMI's next-generation BIOS firmware based on the uEFI Specifi-
cation and the Intel Platform Innovation Framework for EFI.
LAN boot capability for diskless systems (standard PXE)
•
Automatic fail-safe recovery in case of a damaged image
•
Non-volatile storage of setting in the SPI flash (battery only required for
•
the RTC)
Compatibility Support Module (CSM) providing legacy BIOS compatibil-
•
ity based on AMIBIOS8
Command shell for diagnostics and configuration
•
uEFI Shell commands executable from mass storage device in a Pre-
•
OS environment (open interface)
IPMI support in the command shell
•
IPMI firmware providing the following features:
The IPMI controller is accessible via up to two IPMBs, IOL and one KCS
•
interface with interrupt support
The IPMI firmware can be updated in field through all supported inter-
•
faces using the function "fwum..." of the open-source tool "ipmitool". For
further information on the ipmitool refer to the sourceforge.net website.
Two IPMI controller flash banks with automatic roll-back capability in
•
case of an upgrade firmware failure
Board supervision and control extensions such as board reset, power
•
and SPI flash control, etc.
The board is offered with various Board Support Packages including Windows,
VxWorks and Linux operating systems. For further information concerning the
operating systems available for the CP6003-RA/RC, please contact Kontron.
CP6003-RA/RC
SPECIFICATIONS
ID 1046-3890, Rev. 1.0