Table of Contents
Advertisement
CP6003-RA/RC
The following table provides the maximum reference point temperature for the CP6003-RC un-
der the indicated conditions. Operation at temperatures above those specified for the table be-
low can result in reduced system performance or damage to the system.
Table 6-1: Maximum Reference Point Temperature with Core™ i7-2715QE
MAXIMUM REFERENCE POINT TEMPERATURE AT 100°C CPU DIE TEMPERATURE
MAXIMUM PROCESSOR AND
GRAPHICS CONTROLLER
WORKLOAD
60°C
Table 6-2: Maximum Reference Point Temperature with Core™ i7-2655LE
MAXIMUM REFERENCE POINT TEMPERATURE AT 100°C CPU DIE TEMPERATURE
MAXIMUM PROCESSOR AND
GRAPHICS CONTROLLER
WORKLOAD
75°C
Note ...
The temperature values indicated in the tables above can vary depending on
the location of the measurement point or the system performance.
Warning!
As Kontron assumes no responsibility for any damage to the CP6003-RC or
other equipment resulting from overheating of the CPU, it is highly recom-
mended that system integrators as well as end users confirm that the opera-
tional
considerations set forth in this document.
ID 1046-3890, Rev. 1.0
Intel® Core™ i7-2715QE (SV), 2.1 GHz
TYPICAL PROCESSOR AND
GRAPHICS CONTROLLER
WORKLOAD
Intel® Core™ i7-2655LE (LV), 2.2 GHz
TYPICAL PROCESSOR AND
GRAPHICS CONTROLLER
WORKLOAD
environment
of
the
Thermal Considerations
TYPICAL PROCESSOR AND
WORKLOAD AT A REDUCED
CPU FREQUENCY OF 1.7 GHz
70°C
TYPICAL PROCESSOR AND
WORKLOAD AT A REDUCED
CPU FREQUENCY OF 1.7 GHz
80°C
CP6003-RC
complies
GRAPHICS CONTROLLER
80°C
GRAPHICS CONTROLLER
85°C
with
the
thermal
Page 6 - 9
Advertisement
Table of Contents
