Table of Contents
Advertisement
Introduction
1.2
Board-Specific Information
The CP6012 is a CompactPCI single-board computer based on the Intel® Core™ Duo and the
Intel® Core™2 Duo processors and specifically designed for use in highly integrated platforms
with solid mechanical interfacing for a wide range of industrial environment applications.
Some of the CP6012's outstanding features are:
• Supports all Intel® Core™ Duo and Intel® Core™2 Duo microprocessors with up to 667
MHz FSB
• 479-pin µFCBGA package
• 64 kB L1 and up to 4 MB L2 cache on-die, running at CPU speed
• Intel® E7520 and Intel® 6300ESB chipset
• Up to 4GB registered DDR2 SDRAM registered memory with ECC
• 2D high performance VGA controller, 32-bit/33 MHz PCI
• Analog display support up to 1600 x 1200 pixels at 16-bit and 75 Hz
• 64-bit / 66 MHz CompactPCI interface in accordance with the CompactPCI Spec. Rev 3.0
• PMC interface with rear I/O support and bezel cutout on front panel and PCI functionality,
64-bit/66 MHz PCI, 3.3V only
• XMC interface utilizing a x8 lane PCI Express
• Four Gigabit Ethernet interfaces utilizing a x4 lane PCI Express per Gigabit Ethernet con-
troller
• Two Gigabit Ethernet interfaces on the front panel
• Two Gigabit Ethernet interfaces on rear I/O (PICMG 2.16)
• Two EIDE Ultra ATA/100 interfaces
• Two Serial ATA interfaces
• Socket for Serial ATA 2.5" hard disk for boards equipped with a narrow heat sink
• Onboard CompactFlash type II socket (True IDE)
• Up to four USB ports
• Two USB 2.0 ports on the front panel
• Two USB 2.0 ports on rear I/O
• AMI BIOS
• Two 1 MB onboard FWH for redundant BIOS
• Floppy disk interface on rear I/O
• Watchdog Timer
• Real-time clock
• Two COM ports (RS-232):
• One COM port either on the front panel or on the rear I/O
• One COM port on the rear I/O
• I/O extension connector (LPC)
• 4HP, 6U CompactPCI
• Jumperless board configuration
• Passive heat sink solution for forced-airflow cooling
• Hot swap capability: as system controller or as peripheral device
• Supports PICMG Packet Switching Backplane Specification 2.16
• Several rear I/O configurations
• Rear I/O on J3 and J5; optionally on J4
• IPMI compliant Baseboard Management Controller
Page 1 - 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CP6012
ID 33274, Rev. 5.0
Advertisement
Table of Contents
