Board Fru Information - Kontron CP6930 User Manual

Table 4-9: Voltage/Current Sensor Thresholds (Continued)
SENSOR Number / ID Lower criti-
string
30 / Vcc1.2v 1.17 V
31 / Vcc1.0v 0.95 V
32 / Vcc0.9vVREF 0.85 V
33 / Vcc0.9vVTT 0.85 V
34 / Vcc 5.0vIPMB 4.86 V
Note...
LNR (Lower Non Recoverable) and UNR (Upper Non Recoverable) values and val-
ues marked n.a. are not defined.

4.4.3 Board FRU Information

This FRU information contains the IPMI defined Board and Product Information areas that hold the part
number and serial number of the board and the Multirecord Information Area that contains the PICMG
defined Point to Point Information records.
The Internal Use Area is preallocated to 384 bytes and is free for customer use. This FRU information
responds to FRU ID #0, which is the ID for the PM.
4.4.3.1 Structure and Functionality
The Management Controller provides 4 kB non-volatile storage space for FRU information.
Full low level access to read or write a module's FRU Information is provided by regular IPMI FRU Device com-
mands. Please be careful when writing FRU information directly using standard IPMI commands because
there is no write protection. Damaging the FRU Information e.g. may confuse a shelf management software
which uses the FRU data.
4.4.3.2 Board Specific FRU Data
Supported are the following FRU data areas and data fields (shown values are examples, which may differ,
depending on the used board typ):
FRU Board Info Area
• Manufacturing date / time
• Board manufacturer: "Kontron"
• Board Product Name: " CP6930"
• Board Serial Number : "1234567890"
• Board Part Number: "S1701"
• FRU File ID: "FRU-S1701-xx" (xx - template file version)
Lower non
Nominal
cal critical
NA 1.23 V
NA 1.00 V
NA 0.90 V
NA 0.90 V
NA 5.00 V
*)
62
Upper non Upper criti-
critical cal
NA 1.26 V
NA 1.06 V
NA 0.94 V
NA 0.94 V
NA 5.24 V
www.kontron.com
Software Description
Upper Non
Recoverable
NA
NA
NA
NA
NA
CP6930 User Guide