Installation Of Cp6003-Rc Peripheral Devices; Usb Device Installation; Rear I/O Device Installation; Connecting A Peripheral Device To The Cp6003-Rc - Kontron CP6003-RA/RC User Manual

CP6003-RA/RC
3.3.4

Installation of CP6003-RC Peripheral Devices

The CP6003-RC is designed to accommodate various peripheral devices, such as USB devic-
es, CCPMC/conduction-cooled XMC modules, rear I/O devices, a SATA Flash module, etc.The
following figure shows the placement of the SATA Flash module on the CP6003-RC.
Figure 3-2:

Connecting a Peripheral Device to the CP6003-RC

Wedge Lock
Wedge
Lock
Screw
Extractor
Handle
The following chapters provide information regarding installation aspects of peripheral devices.
3.3.4.1

USB Device Installation

The CP6003-RC supports all USB Plug and Play computer peripherals (e.g. keyboard, mouse,
printer, etc.). Support for these devices is only provided via rear I/O.
Note ...
All USB devices may be connected or removed while the host or other
peripherals are powered up.
3.3.4.2

Rear I/O Device Installation

For physical installation of rear I/O devices, refer to the documentation provided with the device
itself.
ID 1046-3890, Rev. 1.0
Extractor
Handle
Wedge
Lock
Screw
Installation
SATA Flash
Module
Heat Sink
Wedge Lock
Page 3 - 15