6�6�- Number Of Quadrants; 6�7�- Measurement Convention - Circutor CVM-E3-MINI-ITF Instruction Manual

CVM-E3-MINI
Press key to access the next programming step.
6.6.- NUMBER OF QUADRANTS
The quadrant number on which the device takes the measurement is selected on this screen.
key for 3 seconds to enter the edit mode. The prog icon will flash on the left
Press the
of the screen.
Use the key to browse the available
To validate the value, press the
Press key to access the next programming step.
6.7.- MEASUREMENT CONVENTION
You can select the measurement convention of the device from this screen.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left
of the screen.
The key is used to browse the different options:
Cir Circutor measurement convention.
IEC IEC measurement convention.
IEEE IEEE measurement convention.
To validate the value, press the
Press key to access the next programming step.
Instruction Manual
options: 2 or 4 quadrants.
key for 3 seconds; the prog icon will stop flashing.
key for 3 seconds; the prog icon will stop flashing.
59