6�4�- Secondary Current (Model Cvm-E3-Mini-Itf); 6�5�- Flex Sensor - Circutor CVM-E3-MINI-ITF Instruction Manual

6.4.- SECONDARY CURRENT (MODEL CVM-E3-MINI-ITF)
Note: Display visible on models: CVM-E3-MINI-ITF and CVM-E3-MINI-ITF-WiEth.
On this screen the current transformer secondary is selected.
Press the
of the screen.
Voltage ratio x Current ratio ≤ 300000.
Use the
To validate the value, press the
Press key
6.5.- FLEX SENSOR
Note: Display visible on models: CVM-E3-MINI-FLEX and CVM-E3-MINI-FLEX-WiEth.
On this screen, you can select the Rogowski flexible sensor, which will be used to measure
the current.
Press the
of the screen.
The key
TYPE1 Rogowski sensor 100uV/A.
TYPE2 Rogowski sensor 76uV/A.
To validate the value, press the
58
key for 3 seconds to enter the edit mode. The prog icon will flash on the left
key to browse the available options: 1A o 5A.
to access the next programming step.
key for 3 seconds to enter the edit mode. The prog icon will flash on the left
is used to browse the different options:
key for 3 seconds; the prog icon will stop flashing.
key for 3 seconds; the prog icon will stop flashing.
CVM-E3-MINI
Instruction Manual