6�10�- Deleting Maximum Demand; 6�11�- Deleting Maximum And Minimum Values - Circutor CVM-E3-MINI-ITF Instruction Manual

CVM-E3-MINI
To validate the value, press the
If the value entered by the user is out of the range of programming values, the programmed
value will be deleted and the system will restore it to the last saved value.
Maximum programming value: 60.
Minimum programming value: 0.
Note: Programming the value 0 disables the calculation of the maximum demand.
Press key to access the next programming step.
6.10.- DELETING MAXIMUM DEMAND
On this screen you select whether or not to delete the maximum demand.
Press the key for 3 seconds to enter the edit mode. The prog icon will flash on the left
of the screen.
key to browse the available options: Yes or No.
Use the
To validate the value, press the
Select Yes to force the device to automatically delete all maximum demand data; the No option
will be displayed again on the screen.
Press key to access the next programming step.
6.11.- DELETING MAXIMUM AND MINIMUM VALUES
On this screen you select whether or not to delete the maximum and minimum values
Ç
Instruction Manual
key for 3 seconds; the prog icon will stop flashing.
key for 3 seconds; the prog icon will stop flashing.
61