6�12�- Deleting Energy Values; 6�13�- Enable Harmonics Display Screen - Circutor CVM-E3-MINI-ITF Instruction Manual

Press the
of the screen.
Use the
To validate the value, press the
Select Yes to force the device to automatically delete all maximum and minimum values; the
No option will be displayed again on the screen.
Press key
6.12.- DELETING ENERGY VALUES
On this screen you select whether or not to delete the energy, cost, CO
hours values
Press the
of the screen.
Use the
To validate the value, press the
Select Yes to force the device to automatically delete all values; the No option will be displayed
again on the screen.
Press key
6.13.- ENABLE HARMONICS DISPLAY SCREEN.
This screen is used to select whether harmonics are displayed or not.
62
key for 3 seconds to enter the edit mode. The prog icon will flash on the left
key to browse the available
to access the next programming step.
key for 3 seconds to enter the edit mode. The prog icon will flash on the left
key to browse the available options: Yes or No.
to access the next programming step.
Yes or No.
options:
key for 3 seconds; the prog icon will stop flashing.
key for 3 seconds; the prog icon will stop flashing.
CVM-E3-MINI
emissions and No. of
2
Instruction Manual