6�20�- Tariff Selection (Models Cvm-E3-Mini-Xxx-Wieth); 6�21�- Backlight, Turning On The Backlit Display - Circutor CVM-E3-MINI-ITF Instruction Manual

6.20.- TARIFF SELECTION (Models CVM-E3-MINI-xxx-WiEth)
You can select the operating tariff on this screen.
Press the
of the screen.
Press key
t1
t2
To validate the value, press the
Press key
6.21.- BACKLIGHT, TURNING ON THE BACKLIT DISPLAY
This screen is used to programme the maximum brightness time of the display since the device
was last used with the keypad. After this time, the display will reduce the brightness level.
Press the
of the screen.
Press the
When the desired value is shown on the screen, use the
cursor.
Maximum programming value: 999 seconds.
Minimum programming value: 1 second.
74
key for 3 seconds to enter the edit mode. The prog icon will flash on the left
to browse the two options:
Tariff 1
Tariff 2
to access the next programming step.
key for 3 seconds to enter the edit mode. The prog icon will flash on the left
key to modify the value of the flashing digit.
key for 3 seconds; the prog icon will stop flashing.
CVM-E3-MINI
and keys to move the edit
Instruction Manual