Preset Tare (Keyed Tare); Display Tare - Rice Lake Legend 480 Series Operation Manual

1.5.5

Preset Tare (Keyed Tare)

1. With the scale empty and display showing zero weight, press
2. Display will show (000000); the focused digit will flash.
3. Edit the value using the following method; or with the 480PLUS, use the keypad.
• Press or to select the digit.
• Press or to increment or decrement the value.
4. Press
TARE
and the LED lights to show the preset tare was entered.
PT
1.5.6

Display Tare

When a stored Tare value is displayed, the Gross and Net LEDs will be off and the
will be lit. To display a stored tare:
1. Press
MENU
2. Press to AUDIT.
3. Press to
TARE
4. Press repeatedly to return to weighing mode.
If there is no tare in the system, the value displayed will be zero and the Gross and Net
LED will be turned off.
See Section 3.2 on page 22
when the value is correct. The display will change to the Net mode
.
and press .
for more information.
© Rice Lake Weighing Systems ● All Rights Reserved
Introduction
.
TARE
0
0
9