Acquire Tare; Remove Stored Tare Value; Preset Tare (Keyed Tare); Display A Stored Tare - Rice Lake Synergy 680HE Technical Manual

3.4.5

Acquire Tare

1. Place a container on the scale and wait for the
to acquire the tare weight of the container. The net weight displays and the Net LED and T LED light,
2. Press
confirming the tare value was entered.
3.4.6

Remove Stored Tare Value

1. Remove all weight from the scale and wait for the
the LED is lit.
2. Press to zero the scale, if needed.
3. Press (or
3.4.7

Preset Tare (Keyed Tare)

Tare mode must be set to keyed or both for the preset tare feature to function.
1. Remove all weight from the scale and wait for the
2. With the scale displaying zero weight, use the numeric keypad to enter the tare weight value and press
3. The display changes to net weight and the Net LED and PT LED light, confirming the preset tare was entered.
Press again while the
Note
3.4.8

Display a Stored Tare

1. Press . audit displays.
2. Press or
3. Press . dsptar displays.
4. Press . The stored tare value displays.
5. Press twice to return to weigh mode.
If there is not a tare in the system, the value displayed is
3.4.9

Clear a Stored Tare

1. Press . audit displays.
2. Press or
3. Press . dsptar displays.
4. Press . clrtar displays.
5. Press or
6. Press or
7. Press to return to weigh mode.
in OIML mode). Display changes to gross weight and the Gross LED lights.
LED is lit, or enter a keyed tare of zero to remove the preset tare value.
until tare displays.
zero.
until tare displays.
to clear the stored tare value. ok displays.
to return the audit menu.
© Rice Lake Weighing Systems ● All Rights Reserved
LED to light.
LED to light. The display reads the negative tare value and
LED and LED to light.
Operation
.
17