Preset Tare (Keyed Tare); Print Ticket; Front Panel User Setup - Rice Lake 880 Performance Series Operation Manual

880 Performance Series Controller/Indicator
1.7.6

Preset Tare (Keyed Tare)

Note
Tare mode must be set to keyed or both for the preset tare feature to function.
1. With the scale empty and zero weight on the display, press
with the focused digit flashing.
2. Edit the value using the keypad on the 880Plus or use the following method for the panel
mount.
• Press or to select the digit
• Press or to increment or decrement the value
• Press
TARE
• Press or to adjust the decimal point placement
• Press
TARE
The display changes to the Net mode and the PT LED lights to display the preset tare was
entered.
Note Entering a keyed tare of zero removes the stored tare value.
1.7.7

Print Ticket

1. Wait for the
2. Press
PRINT
1.7.8

Front Panel User Setup

Press to enter User Setup mode. Use User Setup to:
MENU
• View audit trail information
• Enter Configuration mode if audit trail is enabled
• View or set time and date
• View or clear the accumulator
• Change setpoint values and enable/disable setpoints
• View the current tare value
10 Visit our website
to move to the decimal point entry
when the value is correct
LED to light.
to send data to the configured communications port.
www.RiceLake.com
. 000000 displays
TARE