Operation Menu Softkeys - Rice Lake 820i Series Operation Manual

1.2

Operation Menu Softkeys

Operation menu softkeys are defined to provide flexibility of operator functions for specific applications. Softkey assignments
are listed on the tabs shown at the bottom of the LCD display and softkey functions are activated by pressing the arrow keys
below the softkey tabs. They are password protected and offer access to the following:
• Presets
• ID #1
• ID #2
• Totals
• Setup Menu
The softkeys shown on the display are determined by the indicator configuration and program.
Softkey
Time/Date
System Password
Enabling/Disabling ID#1
Enabling/Disabling ID#2
Dispensing Speeds
Auto Tare Feature
Auto Print Feature
Delay After Discharge
PRESETS ID1 ID2
UNITS
Figure 1-1. 920i Front Panel
Default
Current Time/Date
""""""" Setup Password
- ID #1
- ID #2
Single Speed Single, Dual or Parallel
Enabled Auto Tare Enabled/Disabled
Enabled Auto Print Enabled/Disabled
- Delay After Discharge
Table 1-1. Configurable Softkeys
SETUP MENU
PRINT
Softkey
Time and date of 920i
Changing the password that is required for entry into the setup
menu. Setting the password to nothing will cause the system to
not prompt for a password when the Setup Menu softkey is
pressed.
This allows the operator to log an extra data field. A softkey will
appear on the main screen to allow the operator to enter more
data (ie: formula, ID Truck, container, operator)
This allows the operator to log an extra data field. A softkey will
appear on the main screen to allow the operator to enter more
data (ie: formula, ID Truck, container, operator)
Allows the operator to change the dispense speed operations
Allows the operator to enable/disable the auto tare feature
Allows the operator to enable/disable the auto print feature
Allows the operator to enter a time in seconds to delay after
completion of Discharge before a new Start input is enabled.
© Rice Lake Weighing Systems ● All Rights Reserved
Introduction
Description
3