Load Ranger Wheel Weigh Pad System
3.0
Operation
The Load Ranger wheel weigh pads can be operated independently or with an Ai-1 indicator. The following section provides an
overview and procedures for both types of applications.
3.1
Weigh Pad Display
Item No.
1
Model label location (an identical label is located on the underside of the platform)
2
Display – six digit display; 1'' characters
3
NUM – toggles between weight and ID number; functions as a Zero key; used as an Up arrow to navigate menus or to edit a value
4
SET NUM – display and edit pin number; functions as a Tare key; used as a Down arrow to navigate menus or to edit a value
5
SET MODE – displays pin number and Bluetooth status; functions as a x10 multiplier; used as a Right arrow to edit a value
6
DIAG – displays diagnosis and initiates a key test; used as an Enter key to accept an entry at a prompt or when editing a value
7
Power – turns display on/off; displays scale information; used as Cancel within the menu structure
3.1.1
Key Functions
• Press
to turn on the weigh pad display.
• Press and hold
until displays to turn off the weigh pad display.
• Press and hold
until displays to scroll through the weigh pad information ( displays after ).
• Press
to display the current platform ID number of the weigh pad.
• Press and hold
until displays to zero the weight within 2% of the maximum capacity.
• Press
to display and edit the current pin number associated with the weigh pad.
• Press and hold
until displays to tare the current weight on the weigh pad.
• Press
to display the pin number and Bluetooth status of the weigh pad.
• Press and hold
to turn a x10 multiplier on and off.
• Press
to display a diagnosis of the current mode and to test each key by pressing each one when prompted.
• If the automatic key-lock is active, press
12
Visit our website
1
DATA
2
SET
NUM
NUM
3
4
5
Figure 3-1. Wheel Weigh Pad Display with Cover
Table 3-1. Wheel Weigh Pad Keys
then
, to unlock the keypad.
www.RiceLake.com
SET
DIAG
MODE
6
7
Description