Operation; Initial Power Up; Weigh Mode; Tare - Rice Lake BenchPro Series Operation Manual

Model Split (Range)
BP 1214-6R Off – Sngl
P 1214-15R Off - Sngl
1.5

Operation

1.5.1

Initial Power Up

Upon initial power up, the scale briefly displays the following:
/// (type of firmware installed)
•
• Software type
• Version number of the software

•
If the unit prompts , power cycle the unit by unplugging the power adapter from the outlet or removing the
batteries for 30 seconds. Replace the batteries or plug the adapter back in and turn the scale on.
1.5.2

Weigh Mode

1. Ensure the scale is at zero prior to placing an item on the scale.
2. If the scale is not at zero weight, press
.
stable zero
1.5.3

Tare

The tare function must be enabled in the configuration menu for the tare key to be functional. The factory default
setting is disabled.
1. Place an item or empty container on the scale. The weight value displays.
2. Press . The weight value displays as zero and the
displaying the net weight.
3. To return the scale to the gross mode, remove the item or container from the scale platform and press
. The weight value is zero and the
Brutto mode.
6 BenchPro Series Operation Manual
lb lb /oz
15 x 0.005 15 lb x 0.1 oz
30 x 0.01 30 lb x 0.2 oz
Table 1-7. Scales with Retail Software
→0←
The
.
G/B
annunciator indicates the scale has returned to the Gross/
Units of Measure
oz kg
240 x 0.1 6 x 0.002
480 x 0.2 15 x 0.005
annunciator displays to indicates the scale is
N
annunciator displays to indicates the scale is
grams
6000 x 2
--